We can offer custom design and fabrication of process packages for any type of gas processing including gas dehydration, gas sweetening and dew point control to name a few.

Glycol Dehydration Unit

Glycol dehydration unit is used to remove water from natural gas.

Glycol Regeneration

Glycol regeneration systems to strip the absorbed water, salts, and contaminants from the Rich MEG to produce Lean MEG that can be recycled to storage tanks and production wells.

MOL Sieve Dehydration

Molecular sieve dehydration is the preferred technology over glycol dehydration Where very low water dew points are required.

Gas Sweeting

Gas Sweeting is solutions to remove acid gas components (CO2 and / or H2S) from natural gas.

Dew Point Control

Dew Point Control Units (DPCU) are designed to inhibit the formation of solid hydrates in gas streams.

Fuel Gas Treatment and Metering

Fuel Gas Treatment packages are used to provide specific pre-treatment of gas feed streams. FGTP consist of Knock out drums, filter / Coalescers, Hearters, Gas metering / condensate handling, Gas storage system, Energency shutdown panel.


Separators are used to separate liquid, gas and waterproduced from Hydrocarbon wells.

Carbon Capture

The technology enables CO2 to be selectively absorbed from flue gas via contact with a regenerable solvent, which is specially design to selectively absorb CO2 from gas streams.

Water Treatment systems use to remove oil and other contaminants from produced water/effluent to the level required for disposal or reuse.

Deoiler Hydrocyclones

Deoiler Hydrocyclones are highly efficient in recovering oil from produced water and other process streams.

Gas Flotation

Gas Flotation is a well-proven method of oil recovery in water treatment applicationswith bubble generation technology and Compact Flotation Units (CFU).

Filteration System

Filtration Systems Applications for liquid removal from gas.

CPI Units

CPI Units are designed to remove free oil and suspended solids from water as a primary stage of water treatment and utilise plate packs as the main separation device.

Separator systems is used for the collection, removal, cleaning and disposal of accumulated solids in production facilities for trouble free operation.

Desander Cyclones

Separation of sand and solids from produced water, condensate and / or gas streams.

Wellhead Desanders

Wellhead Desander Cyclones offer a solids-separation technology specifically aimed at multi-phase well streams that is suitable for all wellhead gas / liquid ratios from 100% liquid to 100% gas.

Solids Handling

"It can be achieved by three distinct stages namely: Solids collection and removal from the process, Solids handling and cleaning & Solids disposal."

It is used to remove undesirable effects ue to unwanted salts present in primary oil/water separation.

It includes Carbon Capture, Coal to Liquids (CTL), Gas to Liquids (GTL), Cryogenic Processes & Propane Recovery Systems.

It includes of: "2 & 3 phase Separator, Gas Sweeting, Gas Dehydration Packages, Dew Point Control Units, Oil dehydration, desalting and heating, Produced Water Treatment Packages, Sand handling, Fuel gas processing, Flare systems, Fire and gas utilities, Tankage and shipping."

Can be achieved by pressure rise by adding kinetic energy / velocity to a continuous flow of fluid through the rotor or impeller.

Reciprocating Compressor is positive-displacement compressor that uses pistons driven by a crankshaft to deliver gases at high pressure.

A rotary screw compressor is a type of gas compressor which uses a rotary type positive displacement mechanism.

Centrifugal pumps are used to transport fluids by the conversion of rotational kinetic energy to the hydrodynamic energy of the fluid flow.

 We can offer all type of rating A/H/J for duration upto 2hrs and pressure upto 16 bar.

 We can offer EDG packages as well as Essential Generators of all capacities for offshore application.

 Watermaker is a device used to obtain potable water by reverse osmosis of seawater.

 We can do detail engineering for Offshore/Onshore projects.

 HSE for all industries.

 We can do laser scanning for all sector plant.

 We can supply turbine upto 2 MW.

 We provide rigs for both offshore / onland operations ( Drilling Rigs, Work over Rigs ,Modular Rigs, Trailor Mounted Rigs, Core Hole Drilling Rigs) with services.

We provide down hole equipment including artifical lift equipment (Jet Pump, Electrical Submersible Pump, Progressive Cavity Pump, Sucker Rod) Surface equipments & Subsea equipments, Down hole pressure measurement etc. for both cased hole and open hole DST. We also provide Coil Tubing and Nitrogen Pumping equipment & services.

All types of mud motors, rotary steerable system, MWD/LWD tools with services.

We provide all size of casing, drill pipes, drill collars, testing & completion tubing etc.

We can supply all sizes of casing & tubulars with services.

We provide all size of drilling jars, fishing jars, stablizers, jar intensifier, over shots, all type of mills and all other fishing equipment.

We provide all sizes of liner hanger starting from 16 inch till 4 1/2 inchs with all relvant services.

© 2014 SPECTRUM INNOVATIVE ENGINEERS PVT. LTD. All Rights Reserved | Contact